Electronics Castle Contact MethodsElectronics Castle Payment MethodsCOMODO Secured Seal
Shopping Cart:

now in your cart 0 items


Electronics Castle » Controller Cards » Combo Controllers » JUSA0012S1
Content Wrapper
  • Quantity: 99
  • Weight: 1.15 Lbs
  • UPC: 662774003917
  • Vendor Part #: JU-SA0012-S1JU-SA0012-S1

    USB 2.0 to SATA/IDE is brand newUSB 2.0 to SATA/IDE is in stock
 MSRP: $29.99
 Our Price: $23.99
 You Save: $6.00 (20%)


  • Quickly access data on your SATA or IDE/Ultra DMA hard disks via USB
  • Works with 2.5" or 3.5" SATA or 2.5" or 3.5" IDE hard disk
  • Compatible with most IDE and SATA hard disks of any brand and capacity
ManufacturerSiig, Inc
Manufacturer Part NumberJU-SA0012-S1
Manufacturer Website Addresshttp://www.siig.com
Brand NameSiig
Product NameUSB 2.0 to SATA/IDE
Packaged Quantity1
Package TypeRetail
Product TypeUSB/Firewire/Serial ATA/PATA Adapter
Product UPC0662774003917
Technical Information:
Host InterfaceUSB
Data Transfer RateUp to 480 Mbps
Drive Supportx IDE/ATA
x Serial ATA/150
x Ultra ATA/100 (ATA-6)
x Ultra ATA/133 (ATA-7)
x Ultra ATA/33 (ATA-4)
x Ultra ATA/66 (ATA-5)
x Ultra ATA
x Serial ATA
Drive TypeUltra ATA 100/66/33
Serial ATA
Serial ATA/150
Ultra ATA/100 (ATA-6)
Ultra ATA/133 (ATA-7)
Ultra ATA/33 (ATA-4)
Ultra ATA/66 (ATA-5)
Serial Attached SCSI
Drive ModesUltra DMA
Ultra ATA
Platform SupportPC
Ports1 x USB Female USB 2.0
1 x IDE Female Ultra ATA
1 x Serial ATA Female Serial ATA/150 Serial ATA (7-pin)
Physical Characteristics:
Form FactorNot Applicable
Shipping Dimensions6.25" Height x 8.50" Width x 2.19" Depth
Shipping Weight1 lb
Package Contents
  • USB 2.0 to SATA/IDE
  • Power adapter & SATA power cable
  • USB cable & SATA data cable
  • Users manual
Additional Information
  • Compliant with USB 2.0 & USB 1.1
  • Supports data transfer rates up to 480 Mbps
  • Compliant with Serial ATA 1.0 specification
  • Supports Ultra DMA 0-6 and Multi-word DMA 0-2
System Requirements
  • Pentium or equivalent PC with an available USB 2.0 port
  • Windows 2000 / XP (32-/64-bit) / Server 2003 (32-/64-bit) / Vista (32-/64-bit)
Certifications & StandardsFCC, CE, RoHS
Standard Warranty5 Year Limited Repair/Replace


Submited By: Chawks on 10/26/2008
I purchased this product to rescue data from a dead laptop.

Usage steps:

Extracted the hard drive from the laptop

Connected the power cable and the usb cable to the extracted laptop hard drive.

Connected usb cable from hard drive to the recipient computer.

Windows XP Pro reported a new hard drive.

Copied the data off of the old laptop hard drive to recipient computer.

Excellent product!

Update 4-3-09

This product continues to work fantastically!!

I have now used this product on about 7 hard drives to rescue data. In every case I was able to easily extract the data using this device.

(Please note: you must look very carefully at the setup illustrations otherwise the device will not work.) I did not look carefully the first time I tried this device and was not able to make it work initially. After carefully comparing my setup to the diagram I noticed my problem, corrected it and the device has been flawless)!!

5 of 5 Stars!
Submited By: CapitolK on 02/19/2009
I ve never written an amazon review before, but was compelled to do so when this thing failed so spectacularly. I had hoped to use this to go through hard drives from 6-7 systems I ve accumulated over the years and copy data so I could get rid of the systems. This product failed on *every* drive; neither Windows XP or Vista could access drives when using this. Even worse, I suspect (though I didn t do enough testing to be completely sure on this point) that this thing was rendering useless working drives plugged into it .

1 of 5 Stars!
Submited By: Justin Bongard on 04/05/2009
This little device is so very useful. It works on basically any drive: old, new, ancient (worked on some very early computers with not problem). It is so usefull to be able to fully modify a drive to a computer that won t boot or it would be too much trouble to do so. The greatest thing about it is that a drive shows up, so you can take an exact, bootable image of the drive. The trasnfer speeds are snappy. The device will beep if it does not have enough power. The included power adapter that works with as well any drive I hve not had any problems with. It is too bad there is no on/off switch but this is insignificant. This device has worked on Ubuntu, Windows 7 (Beta), Vista, XP, and mac. This device comes with all the hardware you would need, including a sata cable, power cable for all three drives combined into one, and a mini USB cable.

The only trouble I have ever had is that once it fit a little over where a ribbon cable would go, blocking the power plug for a non-standard IDE drive. But this was a very old, non-standard drive so I still give it a 5 with the hopefull improvent of fixing the excess length of the adapter.

5 of 5 Stars!
Review Average: Amount of Reviews
4 stars, based on 4

Shipping Estimator

Shipping Methods:Rates:
Fedex Ground Fedex Ground (3-5 Day * Excluding Hawaii, Alaska, and Puerto Rico.)$10.29
Country:      Post Code: Estimate shipping forUSB 2.0 to SATA/IDE

Content Wrapper