LIne Conditioner 2400Watt » » »
- Quantity: 99
- Weight: 20.95 Lbs
- UPC: 037332040015
- Vendor Part #: LCR2400LCR2400
2400 watt Automatic Voltage Regulation (AVR) system in convenient 3U 19 inch rackmount configuration. Protects sensitive electronics, computer accessories and home theater equipment from power-related damage and performance problems. Extends the useful life of connected equipment by providing optimum voltage conditions for enhanced efficiency and cooler internal operating temperatures. Reliable transformer-based voltage correction circuits maintain 120V nominal output during voltage fluctuations between 89 and 147V. Three levels of voltage stabilization offer targeted response for overvoltages, undervoltages and severe brownouts. Prevents equipment damage and power related performance problems for computer accessories, printers, home theater equipment, a/v components and other sensitive electronic devices. Network-grade AC surge and EMI/RFI noise suppression. Supports loads up to 2400 watts, 20A. Includes 14 AC outlets arranged in two separately filtered banks, 12 ft AC line cord and 7 diagnostic LEDs which display incoming voltage level, surge suppression and line status. 2 year warranty. $25,000 connected equipment insurance (USA & Canada only).
|Manufacturer Part Number||LCR2400 |
|Manufacturer Website Address||http://www.tripplite.com |
|Product Name||2400W Rack Mount Line Conditioner |
|Product Type||Line Conditioner|
|Protection Type||Surge |
EMI / RFI
|Plug/Connector Type||NEMA 5-15P |
|Receptacles||14 x NEMA 5-15R |
|Noise Suppression||75 dB EMI / RFI|
|Load Capacity||2.12 kVA/2.4 kW |
|Input Voltage||110 V AC |
|Input Voltage Range||89 V AC to 147 V AC |
|Output Voltage||120 V AC |
|Current||20 A |
|Frequency||60 Hz |
|Surge Energy Rating||1 kJ|
Front Panel LEDs:7 diagnostic LEDs indicate:
- Input voltage levels
- Surge suppression
- Line status
|Power Cord/Cable||12 ft |
|Form Factor||3U Rack-mountable |
|Dimensions||5.25" Height x 19" Width x 7.75" Depth |
|Shipping Dimensions||8.75" Height x 9.50" Width x 22" Depth |
|Shipping Weight||21.40 lb|
|Package Contents||2400W Rack Mount Line ConditionerLCR2400 Line ConditionerMounting hardwareInstruction manual|
|Additional Information||Convenient 19 inch rackmount format installs in any 2 or 4 post equipment rackVoltage Regulation: +10%/-12%Input voltages over 128V are reduced by 9.6%Input voltages between 103 and 112V are boosted by 8.9%Input voltages below 102V are boosted by 18.8%Network grade AC surge suppressionTwo built-in isolated filter banks prevent noise interaction between connected devicesBlack color outlets offer basic filtering, white color outlets offer enhanced filtering for the most sensitive connected devices|
Maintains regulated output voltage during severe brownouts and overvoltages for computer accessories, printers, home theater equipment, a/v components, sound reinforcement, point-of-sale equipment, and other applications requiring clean, regulated AC power.
|Standard Warranty||2 Year Limited |
|Submited By: John Stanfield on 12/12/2008|
We have power issues at our office. Sometimes lights go dim for several minutes on end. Rarely do we have a power failure, but we have very "saggy" power. This device compensates for it perfectly. We have 4 non-critical servers connected to it. We did not want to go to the expense of a UPS because everything connected to this line conditioner is not of extreme importance. Our mission-critical servers are maintained by an off-site managed hosting company.
I d also add that this is one of the few electronic devices that I ve encountered that actually has wiring (12 gauge) that matches its advertised capacity. There are so many devices (vacuum cleaners, air compressors) with ridiculous labels like "10 amp" or "5 HP" that have wiring that would cause fires if such labels were true. This device has the wiring capable of sustaining its advertised and intended load (2400W / 120V = 20A which requires 12AWG wire).
|Submited By: Bruce Jones on 03/03/2009|
I purchased this for my son electronic equipment, and as a DJ he has a LOT of it. Turntables, mixers, a PA system, amplifiers, the works. It has been used for many months and provides solid, steady current. A very good choice to provide clean current to electronics.
|Submited By: Tom on 03/25/2010|
I m purchasing a 2nd one of these because I was so happy with the 1st one. I ve added more equipment to my rack which necessitated the addition of another 20 Amp dedicated circuit. I added another LCR2400 to handle the job of conditioning and protecting the equipment on that line. While this unit is not as fancy as some of the other units, I believe it outperforms them and is a great value to boot. I have about $20,000 worth of amps and electronics in my rack and feel confident that these units will do their job to provide clean, regulated voltage and surge protection if called upon.
|Review Average: ||Amount of Reviews|
|5 stars, based on 3|